Tascam US-2x2 USB Audio Interface

<p>Tascam's US-2x2 combines great audio quality and ergonomic design for a powerful 2-in/2-out USB 2 Audio interface. Two of TASCAM’s Ultra-HDDA mic/line preamps provide up to 57dB of gain with nearly inaudible noise and distortion specs.</p><p>The audio design features high-performance, musical components like NE5532 op amps for rich sound quality without coloring the source.</p><p>With solid audio specs, iOS compatibility, and an easy-to-read angled design, the US-2x2 is the ultimate 2-channel interface for home, project, and mobile studios.</p><p><b>Ultra-HDDA Mic Preamps</b></p><p>TASCAM's own Ultra-HDDA mic preamps are the cleanest, quietest, and best-sounding from any interface in their range. A gain range of 57dB makes them ideal for any type of mic – dynamic, condenser, or ribbon.</p><p><b>Low Noise and Low Distortion</b></p><p>TASCAM's Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components, just like classic professional gear. They achieve an incredible EIN rating of -125 dBu, meaning their noise level is practically below the range of hearing. Other impressive specs include a signal-to-noise ratio of 101 dB, out-speccing anything in its price range.</p><p><b>NE5532 Op-amps </b><br>&nbsp;&nbsp; &nbsp;<br>TASCAM uses proven, great-sounding components throughout the US-2x2. One example are NE5532 op-amps, famously used throughout classic recording consoles and signal processors due to their sweet, musical sound.</p><p><b>XLR and TRS</b></p><p>The mic input features a professional XLR connector, which supplies +48V phantom power for condenser microphones. Built from heavy duty metal throughout, the US-2x2 stays put even when moving mics around and changing connections.</p><p>The combo input jack includes TRS inputs for balanced line-level signals from professional processors and synthesizers.</p><p><b>Supports Dynamic and Ribbon Microphones​</b></p><p>Non-powered mics like dynamic and ribbon designs can sound great, but they also have a lower output level than condenser microphones. The US-2x2's Ultra HDDA mic preamps not only feature 57dB of gain, but also a low-noise design so you don't crank up the noise at the same time.</p><p>Plug in modern or classic mics and still get plenty of level on your tracks.&nbsp;</p><p><b>Two Guitar Inputs</b>&nbsp;</p><p>Rock Out with Amp Simulator Software using the Guitar Inputs.&nbsp;The two inputs can be switched to direct guitar inputs, ideal for direct recording of electric and acoustic guitar and bass without the need for a preamp.&nbsp;</p><p><b>High Resolution Recording up to 96kHz/24-bit</b><br>&nbsp;&nbsp; &nbsp;<br>The US-2x2 records at up to 96kHz/24-bit resolution. Even if your target is CD or MP3, recording at higher resolutions gives you more to work with in the mix and can result in a smoother sound.</p><p>The mic preamps and A/D converters work together to capture the clearest signal path, whether you work at 96k or at lower sampling rates.</p><p><b>USB 2.0&nbsp;</b></p><p>USB 2.0, found on nearly any computer, is used as the interface for the US-2x2. Simply connect the interface to any available USB port to supply plenty of bandwidth, even for multichannel 96k work.</p><p><b>Zero-latency&nbsp;Direct Monitoring&nbsp;</b></p><p>Even the most efficient computers and DAW software can produce a slight delay before reaching the outputs, which can distract some vocalists and instrumentalists. A Direct Monitoring path is included to monitor the input signal before it is sent to the computer.&nbsp;</p>

• 2 x Ultra-HDDA mic preamplifiers
• 2 x  XLR/TRS (MIC/LINE) inputs with full +48V phantom power
• 2 x TRS analog balanced outputs
• 18mW/ch headphone output
• USB bus-powered for mobile recording